|
|
Computerized Flashers
 |
 |
 |
|
|
5 PROGRAM SELECTION WITH SOUND CHIP
$83.80 /Each
|
FORWARD CHASE 1 ON 3 OFF CONTROLLER
$112.00 / Each
|
PRE-PROGRAM FORWARD, REVERSE MULTI ACTION
$74.00 / Each
|
SHADOW CHASE 3 ON 1 OFF CONTROLLER
$112.00 / Each
|
| |
|
|
|
|
Product Description:
5 PROGRAM SELECTION WITH SOUND CHIP
Features:
Lamplighter 4 circuit controller
120Volt, 15Amps, 1800Watts
Choose from 5 chase programs
Speed control
Sound setting - controller will chase to the sounds that it hears
4 - Polarized receptacles and rope light 5-wire pigtail
Maximum Qty Bulbs
240 - 7.5Watt
180 - 10Watt
164 - 11Watt
72 - 25Watt
Weight 2.2lbs, Dim 4 1/2 x 7 1/4 x 2 1/8 inches
|
FORWARD CHASE 1 ON 3 OFF CONTROLLER
Features:
Heavy Duty Straight Chase 4-circuit Controller
120Volt, 25Amp, 3000Watt
1-ON 3-OFF pattern, with steady burn switch
Speed control
Screw terminal connectors
Weight 1.7lbs, Dim 8 x 5 1/4 x 2 3/4 inch
|
Product Description:
PRE-PROGRAM FORWARD, REVERSE MULTI-ACTION
Features:
4-circuit Pre Programmed Multi-Action Controller
120Volt, 20Amp, 2300Watt
2on 2off reverse,3on 1off reverse and 1on 3off reverse multi-action program
Speed control
Screw terminal output and power
Weight 1.1lbs, Dim 5 1/2 x 3 1/4 x 2 inch
|
Product Description:
SHADOW CHASE 3 ON 1 OFF CONTROLLER
Features:
Heavy Duty Straight Chase 4-circuit Controller
120Volt, 25Amp, 3000Watt
3-ON 1-OFF dark chase pattern, with steady burn switch
Speed control
Screw terminal connectors
Weight 1.7lbs, Dim 8 x 5 1/4 x 2 3/4 inch
|
 |
 |
 |
 |
|
8 SELECTABLE PROGRAMS OR FADING CHASE
$113.67 / Each
|
32 SELECTABLE PROGRAMS 4CIRCUIT
$165.50 / Each
|
33AMP 4 CIRCUIT MANUAL 8-16-32 PROGRAMS
$205.00 / Each
|
110V SOLID STATE RELAY, 33A 4000W
$120.00 / Each
|
|
|
|
|
|
Product Description:
8 SELECTABLE PROGRAMS OR FADING CHASE
Features:
Manually select one chase pattern from 8 different light shows or select fading sequence
120Volt 4 circuit solid state controller
480Watt 4Amp: 1.0Amp/circuit rated maximum load
Speed Control
Maximum Qty Bulbs
64 - 7.5Watt
48 - 10Watt
44 - 11Watt
19 - 25Watt
Fuse Protected
Screw Terminal Connectors
Weight 2.2lbs; Dim 8 x 5 1/4 x 2 3/4 inches
|
Product Description:
32 SELECTABLE PROGRAMS 4CIRCUIT
Features:
Manually select one chase pattern from 32 different light shows or set to run all 32
patterns
120Volt 4 circuit solid state controller
4000 Watt 33Amp: 8.33Amp/circuit rated maximum load
Speed Control
Maximum Qty Bulbs
533 - 7.5Watt
400 - 10Watt
363 - 11Watt
160 - 25Watt
Fuse Protected
Screw Terminal Connectors
Weight 1.9lbs; Dim 8 x 5 1/4 x 2 3/4 inches
|
Product Description:
33AMP 4 CIRCUIT MANUAL 8-16-32 PROGRAMS
WIZARD CONTROLLERS
Manually select one chase pattern from 32 different light shows or choose Automatic
mode for a mult-action sequence. In the automatic mode, set to run with 8,16,or all 32
chase patterns.
ONE YEAR WARRANTY
120Volt 4 circuit solid state controller
4000 Watt 33Amp: 8.33Amp/circuit rated maximum load
Maximum Qty Bulbs
533 - 7.5Watt
400 - 10Watt
363 - 11Watt
160 - 25Watt
Fuse Protected
Screw Terminal Connectors
Weight 4.5lbs; Dim 8 1/2 x 10 1/4 x 3 inches
|
Product Description:
110V SOLID STATE RELAY, 33A 4000W
Features:
110Volt solid state 4 circuit relay box
110-120Volt, 33Amp, 4000Watt
5 wire signal input
Output screw terminal, fuse protected
Weight 1.8lbs, Dim 8 x 5 1/4 x 2 1/2 inch
|
 |
|
24V SOLID STATE RELAY, 25AMPS 600 WATTS
$110.50 / Each
|
|
Product Description:
24V SOLID STATE RELAY, 25AMPS |
|
|
MODEL 30 TYPE 44 MECHANICAL FLASHER
$166.04 / Each
Product Description:
MODEL 30 TYPE 44 MECHANICAL FLASHER
Features:
Model 30 High Speed Border Chasers and Scintillators
120Volt UL listed
4 contacts rated 10Amp/ circuit, speed rated at 240 flashes/minute
Flash sequence: 3-on/1-off
Silver alloy contacts for maximum life
Bronze selflube bearings
Rust-proof treatment of all steel parts
Weight 4.2lbs; dim 6 1/2 x 5 x 4 3/4 inch
|
|
MODEL 30 TYPE 55 MECHANICAL FLASHER
$170.96 / Each
Product Description:
MODEL 30 TYPE 55 MECHANICAL FLASHER
Features:
Model 30 High Speed Border Chasers and Scintillators
120Volt UL listed
5 contacts rated 10Amp/ circuit, speed rated at 240 flashes/minute
Flash sequence: 4-on/1-off
Silver alloy contacts for maximum life
Bronze selflube bearings
Rust-proof treatment of all steel parts
Weight 5.2lbs; dim 7 x 5 x 4 3/4 inch
|
|
MODEL 20 TYPE 33 MECHANICAL FLASHER
$260.08 / Each
Product Description:
MODEL 20 TYPE 33 MECHANICAL FLASHER
Features:
Model 20 Heavy Duty Border Chasers and Scintillators
120Volt UL listed
3 contacts rated *15/20Amp each (*speed rated at 360/250 flashes/minute)
Flash sequence: 2-on/1-off
Heavy Duty Contacts Silver alloy 1/2inch diameter for maximum life
Ball Bearings sealed to guard against dust and moisture
"B" denotes flasher with contacts prewired to a terminal board
Weight 4.7lbs; dim 6 x 6 x 3 inch
|
|
MODEL 20 TYPE 44 MECHANICAL FLASHER
$2184.72 / Each
Product Description:
MODEL 20 TYPE 44 MECHANICAL FLASHER
Features:
Model 20 Heavy Duty Border Chasers and Scintillators
120Volt UL listed
4 contacts rated *15/20Amp each (*speed rated at 360/250 flashes/minute)
Flash sequence: 3-on/1-off
Heavy Duty Contacts Silver alloy 1/2inch diameter for maximum life
Ball Bearings sealed to guard against dust and moisture
"B" denotes flasher with contacts prewired to a terminal board
Weight 4.9lbs; dim 6 x 6 x 3 inch
|
|
MODEL 30 TYPE S6 SPELLER FLASHER
$287.20 / Each
Product Description:
MODEL 30 TYPE S6 SPELLER FLASHER
Features:
Model 30 Base Plate Type Speller Flasher
120Volt UL listed
6 contacts rated 15Amp/ circuit, speed rated 8-40 Seconds
Flash sequence: Spell Action 'B', each circuit comes on in sequence and stays on,
then all flash
Silver alloy contacts for maximum life
Bronze selflube bearings
Rust-proof treatment of all steel parts
"B" denotes flasher with contacts prewired to a terminal board
Weight 7.5lbs; dim 12 1/4 x 5 x 4 3/4 inch
|
|
MODEL 20B TYPE 55 MECHANICAL FLASHER
$348.48 / Each
Product Description:
MODEL 20B TYPE 55 MECHANICAL FLASHER
Features:
Model 20 Heavy Duty Border Chasers and Scintillators
120Volt UL listed
5 contacts rated *15/20Amp each (*speed rated at 360/250 flashes/minute)
Flash sequence: 4-on/1-off
Heavy Duty Contacts Silver alloy 1/2inch diameter for maximum life
Ball Bearings sealed to guard against dust and moisture
"B" denotes flasher with contacts prewired to a terminal board
Weight 5.4lbs; dim 9 x 7 x 3 inch
|
|
MODEL 30 TYPE S7 SPELLER FLASHER
$251.84 / Each
Product Description:
MODEL 30 TYPE S7 SPELLER FLASHER
Features:
Model 30 Base Plate Type Speller Flasher
120Volt UL listed
7 contacts rated 15Amp/ circuit, speed rated 8-40 Seconds
Flash sequence: Spell Action 'B', each circuit comes on in sequence and stays on,
then all flash
Silver alloy contacts for maximum life
Bronze selflube bearings
Rust-proof treatment of all steel parts
Weight 7.6lbs; dim 13 x 5 x 4 3/4 inch
|
|
MODEL 20B TYPE 66 MECHANICAL FLASHER
$402.60 / Each
Product Description:
MODEL 20B TYPE 66 MECHANICAL FLASHER
Features:
Model 20 Heavy Duty Border Chasers and Scintillators
120Volt UL listed
6 contacts rated *15/20Amp each (*speed rated at 360/250 flashes/minute)
Flash sequence: 5-on/1-off
Heavy Duty Contacts Silver alloy 1/2inch diameter for maximum life
Ball Bearings sealed to guard against dust and moisture
"B" denotes flasher with contacts prewired to a terminal board
Weight 5.7lbs; dim 9 x 7 x 3 inch
|
|
Model 24B Type 44 Mechanical Flasher
$277.60 / Each
Product Description:
Model 24 Heavy Duty Border Chasers and Scintillators
120Volt UL listed
4 contacts rated *15/20Amp each (*speed rated at 360/250 flashes/minute)
Flash sequence: 3-on/1-off
Heavy Duty Contacts Silver alloy 1/2inch diameter for maximum life
Ball Bearings sealed to guard against dust and moisture
"B" denotes flasher with contacts prewired to a terminal board
Weight 4.6lbs; dim 9 x 4 1/2 x 3 inch
|
Wiring of the lights is
not that complicated. If you need advice on wiring, we can offer
guidance, however, if you are not experienced at wiring, you will
need to hire a electrician to properly wire the lighting and
controller. Liability lies with the purchaser to properly install
the lighting and controller.
Need a complete
lighting system? we can even help you with that too.
If you need any assistance
in purchasing your lighting, please feel free to call, or email us
for assistance. We offer advise in selecting the right lighting
and controller for your needs.
We can help you
with a lighting system from one to a million lights.
Tools Needed To Install Lights:
- measuring tape (for spacing out your holes evenly)
- sharpie (for marking drill hole)
- drill & hole saw bit (for drilling your hole for light to
install)
- 14 gauge single strand wire, in 3 or 4 colors, depending on
the controller you choose (available at most any home
improvements store)
|
2.25"x2.25" WELDABLE ALUMINUM CHANNEL W/TURBOS SPACED 6" APART
Product Description:
Made to Order Channel Lighting System ready for installation
- Weldable Aluminum Channel with 'Turbo' Type Fixtures Spaced 6" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Sections of our weldable aluminum channel may be welded together for extra structural support in custom install applications. Flat mill finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
2.25"x2.25" CLEAR ANODIZED ALUMINUM CHANNEL W/TURBOS SPACED 6" APART
Made to Order Channel Lighting System ready for installation
- Clear Anodized Aluminum Channel with 'Turbo' Type Fixtures Spaced 6" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Powder Coating Available, call for color options.
Choose clear anodized aluminum channel for its durability and corrosion resistant properties. Clear silver finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
2.25"x2.25" MIRROR ALUMINUM CHANNEL W/TURBOS SPACED 6" APART
Made to Order Channel Lighting System ready for installation
- Mirror Aluminum Channel with 'Turbo' Type Fixtures Spaced 6" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Choose mirror anodized aluminum channel for its durability and corrosion resistant properties. Mirror silver finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
|
2.25"x2.25" GOLD ALUMINUM CHANNEL W/ TURBOS SPACED 6" APART
Made to Order Channel Lighting System ready for installation
- Gold Aluminum Channel with 'Turbo' Type Fixtures Spaced 6" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Choose gold anodized aluminum channel for its durability and corrosion resistant properties. Gold finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
2.25"x2.25" WELDABLE ALUMINUM CHANNEL W/ TURBOS SPACED 4" APART
Made to Order Channel Lighting System ready for installation
- Weldable Aluminum Channel with 'Turbo' Type Fixtures Spaced 4" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Sections of our weldable aluminum channel may be welded together for extra structural support in custom install applications. Flat mill finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
2.25"x2.25" CLEAR ANODIZED ALUMINUM CHANNEL W/ TURBOS SPACED 4" APART
Made to Order Channel Lighting System ready for installation
- Clear Anodized Aluminum Channel with 'Turbo' Type Fixtures Spaced 4" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Powder Coating Available, call for color options.
Choose clear anodized aluminum channel for its durability and corrosion resistant properties. Clear silver finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
|
2.25"x2.25" MIRROR ALUMINUM CHANNEL W/TURBOS SPACED 4" APART
Made to Order Channel Lighting System ready for installation
- Mirror Aluminum Channel with 'Turbo' Type Fixtures Spaced 4" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Choose mirror anodized aluminum channel for its durability and corrosion resistant properties. Mirror silver finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
2.25"x2.25" GOLD ALUMINUM CHANNEL W/TURBOS SPACED 4"
APART
Made to Order Channel Lighting System ready for installation
- Gold Aluminum Channel with 'Turbo' Type Fixtures Spaced 4" Apart
- Channel Sections Measure: 8'L x 2.25"W x 2.25"H
(stack 8' sections end-to-end to reach desired length)
Additional accessories (not included in price listed above):
End Caps, Mounting Brackets, Seam Sleeves, Controllers and Extension Wire.
Choose gold anodized aluminum channel for its durability and corrosion resistant properties. Gold finish.
60 volt lamps can be wired two per series for 120 volt operation using one of our four circuit controllers. Low voltage controllers and transformers are available for 24 volt operation. Choose 240 volt bulbs for your European installations.
Provide us with your exact dimensions and we will build your system to fit your application. Call our lighting specialists at
404 361 5599 for your custom requirements.
|
|
Channel Caps
|
2.25" x 2.25" STEEL PRIMER FINISH END CAP
|
|
2.25" x 2.25" WHITE STEEL END CAP
|
|
4"x2" BLACK METAL END CAP
|
|
2.25" x 2.25" SILVER MOLDED END CAP
|
|
2.25" x 2.25" BLACK MOLDED END CAP
|
|
2.25" x 2.25" GOLD MOLDED END CAP
|
 |
| 2.25" x 2.25" GALVANIZED STEEL SLEEVE
to join Links together. |
| $5.50 / Each |
|
